Step 7: Using two separate cardboard pieces, make a T-shaped stand. It would not hurt to use both a glue gun and tape.
Well, if you really want to use tape, make sure that your lens won’t wobble. Use a glue gun to do that but, alternatively, you may also use duct tape or packaging tape. Once that piece is done, attach it back to where it was originally on the shoebox. Step 6: Attach this part back to the shoebox. Again, if you’re not comfortable in using this equipment, ask somebody to help. Now, remember that a glue gun takes time to harden so just keep an eye on your project. Also, make sure that the lens is leveled in every angle to avoid any image distortions later on. Using a glue gun, attach it, and make sure that it is secured. Slot in the magnifying glass inside the hole that you made on the piece of the box. Step 5: Attach the magnifying glass using a glue gun. Remember to cut tightly inside the outline to ensure a tighter fit when you slot in the lens again later. Once you’re done with this, get your scissors or cutters and cut the hole. Place your magnifying glass on top of the cutout and trace the outer part of the glass to create an outline. Remember that narrow piece of the shoebox you cut out earlier? Well, you’ll need that for this part of your DIY projector. Step 4: Cut a hole on the piece of the shoebox you cut out in Step 2. Making the Lens Photo by Jo Szczepanska via Unsplash
By blacking all the inner panels, the light coming out of your phone would be more directed towards the only exit, which is the magnifying lens you will be installing later.Īlternatively, you could also use foil as a cover instead of the paper or paint. Using the paper or the spray paint, cover the inner part of the box black. Step 3: Blackout the inside of the shoebox. That small panel is where you will be attaching your lens later. Be sure not to damage or overcut the piece you’re taking away because you’ll use that later. We will start off making the body by cutting one of the narrow sides of the shoebox. Step 2: Cut one of the narrow sides of the shoebox. Finally, if you are buying a magnifying glass, be sure to remove the handle because we won’t have any use for it.Īlso, if you’re not comfortable using scissors, cutters, and glue guns, ask someone to help you (better safe than sorry). Your black sheets of paper or spray paint should also be enough to cover the inner part of the shoebox. For the shoebox and the cardboards, make sure to get something that could fit and hold your phone. Making the Body of a DIY Projector Photo by George Hodan via Needpixįirst things first, you have to make sure that you’ve gathered all the materials that we listed above. Compared to your usual phone stand or a phone cup holder, the one you’ll be using for the projector is more upright.ĭoing each part before assembling the whole phone projector will make your life ten times easier.
Finally, the projector’s phone stand is something that is built differently. The lens is where most of the science takes place. The body is the largest part but the easiest one to do. The DIY projector has three parts: the body, the lens, and the phone stand.
#MAKE A PROJECTOR HOW TO#
Not all people could readily get this device, though, so we will also learn today how to make a projector. By using one, you would be able to watch movies on a larger area like your bedroom wall.
#MAKE A PROJECTOR PORTABLE#
These things can come as battery-operated or wired like the Nebula Capsule or the Sony Portable Pico. Photo by FrameStockFootages via ShutterstockĪ phone projector is a convenient device that lets you flash your screen on a flat surface.
0 kommentar(er)
